Yard Signs

Utilize the vertical flutes (almost always a landscape orientation) to allow H-Wire and Beefy Stakes to be inserted into the bottom of the sign. Yard Signs can also be ordered with grommets for hanging either indoors or outdoors.

Note: Because of the wide potential size range of our large format products, there are additional file setup considerations. See the File Setup tab for more. 

  • Outdoor or Indoor
  • Printed on 4mm corrugated plastic
  • sizing from 12"x12 to 48"x46"
  • landscape or portrait orientation.
  • 1 or 2 sided
  • Next Day Available
  • Fade Resistant
  • Water Resistant
  • Online Templates
See above.

For the best looking results, we recommend the following:

  • High-resolution PDF. (.jpg, .eps, and .tif are also accepted, but .pdf is preferred.)
  • Minimum 300DPI with add crop marks and a .125" bleed.
  • CMYK Colorspace (cyan, magenta, yellow and black) RGB color space is for on-screen ONLY.
  • All fonts should be attached, imbedded or outlined. (PDF will automatically do this)
  • Crop marks need to be added .125" outside the workable area
  • If your artwork goes to the edge of your design, you need to add a bleed, or .125" of extra image beyond the trim line. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
  • Safe Area is the 1/8" (0.125") area inside the trim line. Do not put critical information or images within the Safe Area. This is to prevent minor cutting variations from leaving unintended results at the trim edge.
  • If you want printed borders, they must be placed a minimum of 1/8" (0.125") inside the trim line and include bleed. This is to prevent minor cutting variations from leaving unintended results at the trim edge.